We're so confident of our products that we provide no hassle product exchange.
Cisco 300-110 Exam Overview:
| Certification Vendor: | Cisco |
| Exam Name: | Designing Cisco Wireless Networks |
| Exam Number: | 300-110 WLSD |
| Available Languages: | English, Japanese |
| Exam Price: | USD 400 |
| Exam Format: | Multiple choice, Simulations, Scenario-based questions |
| Exam Duration: | 120 minutes |
| Real Exam Qty: | 55-65 |
| Certificate Validity Period: | 3 years |
| Related Certifications: | CCNP Wireless Cisco Certified Specialist - Wireless Design |
| Passing Score: | Variable (approx. 750-850 / 1000) |
| Recommended Training: | Designing Cisco Wireless Networks (WLSD) Training Course |
| Exam Registration: | Pearson VUE Registration |
| Sample Questions: | Cisco 300-110 Sample Questions |
| Exam Way: | Online proctored or onsite at Pearson VUE test centers |
| Pre Condition: | No mandatory prerequisites; recommended knowledge of CCNA Wireless or equivalent experience |
| Official Syllabus URL: | https://www.cisco.com/site/us/en/learn/training-certifications/exams/wlsd.html |
Cisco 300-110 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Mobility Design | 25% | - Mobility architecture models
- Roaming optimization
|
| Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| WLAN High Availability and Security Design | 20% | - High availability design
|
| Wireless Site Survey | 25% | - Design requirements collection and constraint evaluation
- Pre-deployment survey and validation - RF propagation and attenuation analysis |
Cisco Designing Cisco Wireless Networks Sample Questions:
1. An enterprise is using two wireless controllers to support the wireless network. The data centre is located in the head office. Each controller has a corporate WLAN configured with different SSID names. The APs are installed using a round-robin approach to load balance the traffic. What should be changed in the configuration to optimize roaming?
A) Place the access points per floor on the same controller.
B) Use the same WLAN name for the corporate network on both controllers.
C) Move all access points to one controller and use the other as N+1 HA.
D) Use the same WLAN name for the corporate network on both controllers.
2. An engineer is performing a passive survey report. The coverage heat map shows the entire site with all signal levels. To see only the desired coverage, which action must the engineer take?
A) Use the RSSI slider to set the heat map to the desired cutoff filter.
B) Filter the results to show the desired APs only.
C) Use the RSSI calibration tool to configure the receiver sensitivity.
D) Change the color scheme to show the desired heat map.
3. A university lecture hall has a Cisco wireless high-density network with this configuration: ?5 GHz only ?20-MHz channels ?UNII-1, UNII-2, and UNII-2E channels ?TPC minimum = 8 ?TPC maximum = 14 The lecture hall is 200 feet by 100 feet and has 16 Cisco APs that use directional antennas. Which feature must be included in the design to mitigate and reduce high-channel utilization from rogue APs?
A) RxSOP
B) band select
C) DFS detection
D) 802.11w
4. A wireless consultant must design a Cisco WLAN. The consultant recommends a solution that requires 12 Cisco 9100 Series APs connected to a Cisco 3800 Series PoE+ switch. Each AP requires PoE+ for full functionality. What is the total PoE requirement in watts?
A) 360
B) 1080
C) 184.8
D) 720
5. An engineer is designing a FlexConnect deployment for 40 remote branch offices, each with a 10 Mbps WAN circuit back to a central Catalyst 9800 WLC. Which design consideration must be validated before deployment?
A) The round-trip latency between the AP and the WLC must not exceed 20 ms.
B) The round-trip latency between the AP and the WLC must not exceed 300 ms.
C) All WLANs must be configured for central switching.
D) Each branch must have a local WLC for AP registration.
Solutions:
| Question # 1 Answer: D | Question # 2 Answer: A | Question # 3 Answer: A | Question # 4 Answer: A | Question # 5 Answer: B |
By Maxwell
