JN0-106 Dumps PDF New [2026] Ultimate Study Guide
JN0-106 Exam Dumps PDF Updated Dump from SurePassExams Guaranteed Success
Juniper JN0-106 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 94
Click the Exhibit button.
Referring to the exhibit, OSPF has three export policies that match different static route prefixes.
The 10.10.10.0/24 static route does not match any terms in the policy1 routing policy. What happens next in this scenario?
- A. The static route is rejected by the policy1 routing policy.
- B. The static route is evaluated by the policy2 routing policy.
- C. The static route is evaluated by the policy3 routing policy.
- D. The static route is rejected by the default routing policy.
Answer: B
NEW QUESTION # 95
In Junos OS, what is the function of the candidate configuration database compared to the active configuration database in system operations?
- A. Maintains routing tables
- B. Holds pending configuration changes
- C. Controls packet forwarding
- D. Stores logs
Answer: B
Explanation:
The candidate configuration is a working area where administrators make changes before committing them. The active configuration is the one currently running. This separation allows safe editing, validation, and rollback, reducing the risk of misconfiguration affecting live traffic.
NEW QUESTION # 96 
The MX204 has 12 built-in ports. Referring to the exhibit, to which interface does the arrow point?
- A. ##-0/1/6
- B. ##-0/2/7
- C. ##-0/0/7
- D. ##-0/1/7
Answer: D
Explanation:
The Juniper MX204 is a fixed-configuration router that utilizes a specific hierarchical naming convention for its physical interfaces: type-fpc/pic/port. In the MX204 architecture, there is a single built-in Flexible PIC Concentrator (FPC), which is always designated as FPC 0 . This FPC is subdivided into two logical Physical Interface Cards (PICs): PIC 0 and PIC 1 .
As shown in the exhibit, PIC 0 contains four high-speed ports (labeled 0/0 through 0/3) that typically support
40GbE or 100GbE speeds. PIC 1 contains eight ports (labeled 1/0 through 1/7) designed for 1GbE or 10GbE connectivity. These ports are arranged in a stacked, $2 \times 4$ grid. The labeling system on the chassis indicates the port numbers for each column. In the fourth column of the PIC 1 block, the top port is identified as 1/6 and the bottom port as 1/7 .
The blue arrow in the exhibit points directly to the bottom-right interface in the PIC 1 section. Correlating this physical location with the chassis labels confirms that the port number is 7. When combined with the FPC and PIC identifiers, the full interface name is xe-0/1/7 (assuming a 10GbE transceiver is installed). Understanding this physical-to-logical mapping is essential for accurate cabling and configuration within the Junos OS, ensuring that administrators apply the correct logical unit and protocol settings to the intended physical hardware.
Reference: Junos OS Fundamentals, Interface Naming, MX204 Hardware Overview.
NEW QUESTION # 97
Your system administrator notified the infrastructure team that all server NICs will be moving to jumbo frames. All of the NICs used by servers are 1 gigabit. The starting frame size will be 4K. The exact frame size may change depending on testing results. In this scenario, which choice would provide a flexible solution?
- A. Use the system internet-options path-mtu-discovery to dynamically adjust MTU.
- B. Apply the MTU to each interface family for each 1 gigabit interface.
- C. Set the app-engine compute-cluster Ethernet MTU size for the Junos VM.
- D. Create a group that adjusts MTU size on 1 gigabit interfaces and apply at the interfaces level.
Answer: D
Explanation:
In large-scale Junos deployments, efficiency and flexibility are achieved through the use of configuration groups . When faced with a requirement like moving all 1-gigabit interfaces to jumbo frames-with the caveat that the exact MTU value (e.g., 4000 bytes) might change after testing-manually editing every interface is both tedious and prone to error.
By creating a configuration group under the [edit groups] hierarchy, you can define the MTU parameter once.
You then use the apply-groups statement at the [edit interfaces] level or on specific interface ranges. This creates a " template " effect. The flexibility comes into play during the testing phase: if results indicate that a
9000-byte MTU is preferable to 4000 bytes, the architect only needs to modify the value in the group definition. The Junos OS inheritance mechanism automatically propagates this update to every interface associated with that group.
Applying MTU at the family level (Option B) is less efficient and doesn ' t handle the physical Layer 2 MTU requirements of jumbo frames as effectively. Path-MTU discovery (Option D) is a protocol-level function for avoiding fragmentation but does not configure the local interface ' s hardware capability to accept larger frames. Thus, groups represent the best practice for centralized, scalable management.
Reference: Configuration Basics, Junos Groups, Interface MTU Configuration.
NEW QUESTION # 98
You power on a new MX Series router for the first time and connect to the console. You notice that no transit interfaces are passing traffic. In this scenario, which statement is correct?
- A. All interfaces are enabled and have an IP address of 10.0.0.1.
- B. The interfaces are not configured.
- C. The interfaces are configured as Layer 2 trunk ports.
- D. All interfaces are enabled with DHCP client enabled.
Answer: B
Explanation:
When you initially unbox and power on a Juniper MX Series router, it loads a factory-default configuration
. Unlike some consumer-grade or lower-end enterprise switches that might have all ports active in a default VLAN, high-performance routers like the MX Series prioritize security and intentionality. In the factory- default state, the transit interfaces are not configured .
While the physical hardware interfaces (such as ge-0/0/0 or xe-0/1/0) are detected by the Junos kernel, they lack any logical unit or protocol family definitions (like family inet or family inet6). Without a logical unit- even a simple unit 0-the Packet Forwarding Engine (PFE) will not accept or forward any traffic arriving on those ports. Furthermore, as discussed in previous questions, the device is essentially in a " locked " state; you cannot even commit new changes to enable these interfaces until you have defined a root-authentication password. This " blank slate " approach ensures that no traffic accidentally flows through a newly installed provider-edge device until an architect has explicitly defined the routing policies, firewall filters, and interface parameters required for the specific network environment. To begin passing traffic, you must manually define the logical units and assign the appropriate IP addresses or switching parameters to each interface.
Reference: Configuration Basics, Initial Configuration, Factory Default Settings.
NEW QUESTION # 99
You received a new Junos device and are configuring the system-related settings. You must configure this device for the current date and time on the US West coast. You have set the time zone to America/Los_Angeles, however, the system time and date did not change to the correct local time.In this scenario, which two additional actions would satisfy this requirement? (Choose two.)
- A. Configure an NTP server.
- B. Set the date and time setting manually.
- C. Configure a DNS server.
- D. Reboot the device.
Answer: A,B
Explanation:
In Junos OS, configuring the time-zone (such as America/LosAngeles) within the [edit system] hierarchy establishes the offset from Coordinated Universal Time (UTC) and governs how the device displays timestamps for logs and system events. However, simply setting the timezone does not adjust the underlying system hardware clock; it only dictates how that clock ' s data is interpreted and presented. To ensure the device reflects the correct local time, the administrator must either synchronize the system with an external reference or manually input the current date and time.
Configuring a Network Time Protocol (NTP) server is the preferred professional method, as it allows the device to automatically synchronize its clock with a reliable stratum source, ensuring long-term accuracy and consistency across the network. Alternatively, the set date operational mode command can be used to manually define the current year, month, day, hour, and minute. While a DNS server is necessary for resolving the hostnames of NTP servers, it does not provide time data itself. Furthermore, rebooting the device will not correct a fundamentally unset or drifting clock. Therefore, combining the correct timezone with either NTP synchronization or a manual date setting is the standard procedure for establishing temporal accuracy on a Junos platform. Reference: Operational Monitoring and Maintenance, System Time and NTP.
NEW QUESTION # 100
You are trying to diagnose packet loss at interface ge-0/0/3. In this scenario, which command would help you view error statistics in real time?
- A. monitor interface ge-0/0/3
- B. show interface ge-0/0/3
- C. show interface terse
- D. monitor interface traffic
Answer: A
Explanation:
The monitor interface ge-0/0/3 command is used in Junos OS to view real-time statistics for a specific interface. This command helps in diagnosing issues like packet loss by displaying real- time updates of traffic and error statistics for the specified interface.
NEW QUESTION # 101
Click the Exhibit button.
Referring to the exhibit, what is the source IP address of the ping that was executed?
- A. 10.23.0.2
- B. 10.23.0.3
- C. 10.12.0.2
- D. 10.24.0.4
Answer: A
Explanation:
The exhibit shows a ping test being executed from router R2 to the IP address 10.23.0.3. Since the ping command is issued on R2 and we see successful replies from 10.23.0.3, it means the source of the ping must be an interface on R2. Given the network diagram and the IP address scheme, the source IP address of the ping is on the interface ge-0/0/2 of R2, which is in the subnet 10.23.0.0/24. The only logical IP address for R2's interface in this subnet, based on standard networking practices and the given options, would be 10.23.0.2. The other addresses provided in the options belong to different subnets or are the destination of the ping itself.
NEW QUESTION # 102
Which two traffic types are processed by a Routing Engine using Junos OS? (Choose two.)
- A. routing updates
- B. traffic with CoS markings
- C. transit traffic
- D. local management traffic
Answer: A,D
Explanation:
The Routing Engine (RE) in a Junos device serves as the centralized intelligence and management hub, primarily responsible for the control and management planes of the system. In this capacity, the RE is tasked with processing routing updates, such as OSPF Link State Advertisements (LSAs) or BGP Update messages.
These updates are vital for the RE to maintain the Routing Information Base (RIB), calculate the shortest paths, and subsequently populate the Forwarding Information Base (FIB) which is then pushed to the Packet Forwarding Engine (PFE).
Furthermore, the Routing Engine handles all local management traffic. This category encompasses administrative access through the Command Line Interface (CLI) via SSH or Telnet, SNMP queries from network management systems, and system logging processes. Because the RE runs the Junos OS kernel, it must directly interpret and respond to these management-level requests to ensure the device remains configurable and observable. Conversely, transit traffic-the data passing through the device from one ingress port to an egress port-is offloaded to the PFE to be handled at wire speed. While the PFE manages the heavy lifting of data forwarding and Class of Service (CoS) application, the RE remains focused on high-level protocol maintenance and system administration, ensuring that control plane stability is maintained even under heavy traffic loads. Reference: Junos OS Fundamentals, Control Plane Functions, Routing Engine Traffic.
NEW QUESTION # 103
Which two fields are you required to enter when you create a new user account? (Choose two.)
- A. user ID
- B. username
- C. full name
- D. login class
Answer: B,D
Explanation:
In Junos OS, when creating a new user account, the minimum required fields are the username and the login class. The username is the identifier for the account, while the login class specifies the level of access or permissions the user has on the device. Login classes allow for the differentiation between various roles, such as read-only access or full administrative rights. Other information, such as full name or user ID, is optional and not strictly necessary for the creation of a functional user account.
NEW QUESTION # 104
Which statement is correct regarding the Junos OS commit operation?
- A. A commit activates the candidate configuration and makes it the active configuration.
- B. A commit only validates syntax without applying changes.
- C. A commit permanently deletes the previous configuration.
- D. A commit is required before any configuration changes can be made.
Answer: A
Explanation:
The commit command applies the candidate configuration, making it the new active configuration.
Junos OS also retains rollback configurations so you can revert to previous states if needed.
NEW QUESTION # 105
You must add a large hierarchical configuration to your Junos device. You also want to completely replace the existing candidate configuration with a new configuration file. Which command would allow you to accomplish these tasks?
- A. load override terminal
- B. load set terminal
- C. load merge terminal
- D. load factory default
Answer: A
Explanation:
The load override terminal command replaces the entire candidate configuration with the new configuration being entered, making it suitable for loading a large hierarchical configuration and discarding the existing one.
NEW QUESTION # 106
Your switch01 device lost network connectivity after a configuration change. You must recover the device to a known working state using the rescue configuration that was previously saved. The device is only accessible using the console. In this scenario, which command sequence will successfully restore the rescue configuration?
- A. user@switch01 > configure
[edit]
user@switch01# load override rescue
[edit]
user@switch01# commit - B. user@switch01 > request system configuration rescue save
user@switch01 > configure
[edit]
user@switch01# commit - C. user@switch01 > configure
[edit]
user@switch01# rollback rescue
load complete
[edit]
user@switch01# commit - D. user@switch01 > request system configuration rescue delete
user@switch01 > reboot
Answer: C
Explanation:
In Junos OS, the rescue configuration is a specifically designated file that stores a known-working configuration, intended to be used for emergency recovery when the device becomes unreachable or unstable due to recent changes. This configuration is not created automatically; an administrator must proactively save a stable state using the operational mode command request system configuration rescue save. This differs from the standard rollback archive, which automatically stores up to 50 previous configurations but can eventually rotate out the specific " last known good " state needed for recovery.
When a device loses network connectivity, console access becomes the only viable management path. To restore the rescue configuration, the administrator must enter configuration mode using the configure command. Once inside the candidate configuration buffer, the rollback rescue command is issued. This command directs the Junos OS to locate the designated rescue file and load its contents over the current candidate configuration. Upon receiving the " load complete " confirmation, the administrator must execute a commit to promote the candidate configuration to the active, running state. Sequence C correctly follows this logic. Sequence A is technically incorrect for standard rescue restoration as load override typically targets specific file paths or URLs, whereas rollback rescue is the built-in mechanism for this function. Sequences B and D are destructive or counter-productive, either deleting the rescue file or overwriting it with the current, non-functional configuration state. Reference: Operational Monitoring and Maintenance, Configuration Recovery, Rescue Configuration.
NEW QUESTION # 107
Which statement describes the primary purpose of a routing policy in Junos OS?
- A. It controls which routes are accepted or advertised by a routing protocol.
- B. It sets the maximum number of routes in the routing table.
- C. It determines the physical interface used for forwarding traffic.
- D. It enables automatic rollback of routing changes.
Answer: A
Explanation:
In Junos OS, a routing policy is a powerful tool used to manage the flow of routing information between the Routing Information Base (RIB) and routing protocols. Unlike forwarding decisions, which are handled by the Packet Forwarding Engine, routing policies function within the control plane on the Routing Engine. Their primary purpose is to define specific criteria for importing routes into the routing table from neighbors or exporting routes from the routing table to neighbors.
Routing policies consist of terms containing from (match) and then (action) statements. They allow administrators to filter prefixes (e.g., denying specific BGP routes), modify route attributes (e.g., changing OSPF metrics or BGP communities), and manipulate path selection behavior. For example, an export policy might be used to ensure that only specific internal subnets are advertised to an ISP via BGP, preventing the accidental leakage of private infrastructure addresses. By default, Junos applies " default policies " for each protocol (such as OSPF accepting all OSPF routes), but custom policies allow for granular control over how the device interacts with the rest of the network. This ensures that the routing table contains only the desired paths for optimal traffic engineering.
Reference: Routing Policy and Firewall Filters, Policy Framework.
NEW QUESTION # 108 
Referring to the exhibit, which two statements about IPv6 routing are correct? (Choose two.)
- A. The router cannot forward traffic to remote IPv6 networks.
- B. The router is not learning IPv6 routes from peers.
- C. Traffic destined for the 2001:db8:22:108::/64 network is forwarded using the ge-0/0/5.0 interface.
- D. The router is connected to the 2001:db8:22:107::/64 network.
Answer: A,B
Explanation:
The provided exhibit displays the output of the show route table inet6.0 command, which represents the master routing table for IPv6 unicast traffic in Junos OS. Analysis of the specific route entries reveals that all listed destinations are categorized as either [Direct/0] or [Local/0] . These route types indicate that the table only contains networks physically connected to the router ' s interfaces and the specific IP addresses assigned to those interfaces.
Because there are no routes identified by dynamic protocols (such as OSPFv3, IS-IS, or BGP) or static entries, it is verified that the router is not learning IPv6 routes from any neighbors or peers. Consequently, the routing table lacks reachability information for any non-local or remote IPv6 segments. Without these routes or a configured default gateway (::/0), the router is unable to forward traffic to remote IPv6 networks. Statements C and D are factually incorrect based on the exhibit: the 2001:db8:22:108::/64 network is associated with interface ge-0/0/4.0 (not ge-0/0/5.0), and the 2001:db8:22:107::/64 network is entirely absent from the displayed routing table.
Reference: Routing Fundamentals, IPv6 Implementation, Routing Table Interpretation.
NEW QUESTION # 109
After the factory default configuration is loaded, which configuration object must be created prior to the first commit?
- A. root authentication
- B. loopback IP address
- C. out-of-band connectivity
- D. host name
Answer: A
Explanation:
When a Junos device is initialized with its factory default configuration, it essentially exists in a
"blank slate" state with minimal operational parameters. The most critical security requirement imposed by Junos OS during this initial setup phase is the mandatory configuration of a root-level password. Specifically, the root-authentication object must be defined within the [edit system] hierarchy before the system will allow the candidate configuration to be successfully committed for the first time.
This is a built-in safety mechanism designed to prevent the device from being deployed in an insecure state with an empty administrative password. If an administrator attempts to execute a commit command without having set the root password, the Junos OS parser will return an error and fail the commit process. While setting a host name or configuring management interfaces are best practices for operational readiness, they are not strictly required by the Junos commit-check logic. Only the root-authentication (typically a plain-text password or an encrypted string) is a hard prerequisite to transition the device from the factory-default state to an active, running configuration.
NEW QUESTION # 110
An administrator wants to set up a remote user authentication service for the many users that access a Juniper security device. In this scenario, what are two supported authentication protocols? (Choose two.)
- A. SHA
- B. IPsec
- C. TACACS+
- D. RADIUS
Answer: C,D
Explanation:
For managing high volumes of administrative users, Junos OS supports externalizing the authentication, authorization, and accounting (AAA) process. The two primary industry-standard protocols supported for this purpose are RADIUS (Remote Authentication Dial-In User Service) and TACACS+ (Terminal Access Controller Access-Control System Plus).
Using these protocols allows an architect to maintain a centralized user database on an external server (like Cisco ACS, FreeRADIUS, or Microsoft NPS) rather than configuring every individual user account locally on every Junos device. When a user attempts to log in via SSH or the console, the Junos device acts as a client, forwarding the credentials to the remote server. RADIUS is often preferred for its broad compatibility and efficiency, while TACACS+ is frequently chosen for its ability to separate authentication from authorization and its support for granular command-level accounting. SHA (Secure Hash Algorithm) is a cryptographic hash function used within these processes but is not an authentication protocol itself. Similarly, IPsec is a suite for securing IP communications (VPNs) and is unrelated to the administrative login AAA sequence.
NEW QUESTION # 111
Which two statements about prefix lists in Junos are correct? (Choose two.)
- A. Prefix lists can be used in both firewall filters and routing policies.
- B. Prefix lists cannot be used in routing policies.
- C. Prefix lists can be re-used in multiple routing policies.
- D. Prefix lists cannot be used in firewall filters.
Answer: A,C
Explanation:
Prefix lists are reusable objects that can be referenced in multiple routing policies. They can also be used in both routing policies and firewall filters to match IP prefixes.
NEW QUESTION # 112
......
Pass Your Juniper Exam with JN0-106 Exam Dumps: https://www.surepassexams.com/JN0-106-exam-bootcamp.html
JN0-106 Exam Dumps - Juniper Practice Test Questions: https://drive.google.com/open?id=1euNmEhO0q2-Eu-f9eLMyuMDoL__x5hRd