[Aug-2021] HPE ASE HPE0-J68 Exam Practice Dumps
2021 HPE0-J68 Premium Files Test pdf - Free Dumps Collection
NEW QUESTION 64
A customer has a large deployment of HPE Synergy compute modules. HPE 3PAR StoreServ arrays, and HPE StoreOnce system in a single data center. They are concerned about the risk of data loss due to site disaster and seeks cost-effective offsite Disaster Recovery protection without the need to deploy a secondary site.
Which HPE solution should you recommend?
- A. HPE StoreOnce RMC
- B. HPE StoreOnce CloudBank
- C. HPE StoreOnce Catalyst
- D. HPE StoreOnce VSA
Answer: C
NEW QUESTION 65
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?
- A. Enable storage tiering on the system and map the volume to the new tier
- B. Perform controller upgrade to a Nimbel CS3000 storage systems
- C. Add additional SSd drives as cache to the system and PIN the volume
- D. Change RAID of the drives to RAID -1and setup quality of services for the volume
Answer: C
NEW QUESTION 66
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
- A. Run tunesys after raising the AFC to take advantage of the additional space
- B. Increase current AFC configuration to reflect the additional space
- C. Remove flash cache for all VVS then run create Flash cache
- D. Remove the old AO configuration and recreate a new one
Answer: C
NEW QUESTION 67
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Persistent port (96)
- B. Peer persistence
- C. Persistent Memory
Answer: A
Explanation:
D Persistent Cache
NEW QUESTION 68
How does the HPE StoreVirtual VSA storage platform scale performance and capacity?
- A. recreates storage pools on multiple devices
- B. eliminates the need for storage controllers
- C. enables access through multiple protocols
- D. aggregates all resources into a single storage pool
Answer: A
NEW QUESTION 69
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?
- A. VSAN
- B. Zoning
- C. Port isolation
- D. IVR
Answer: C
NEW QUESTION 70
A customer migrate their infrastructure from a 3rd party storage to a Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMVision?
- A. Nibmle service processor collects relevant per VM performance data and send them using SSL port 443 to VMvision
- B. SNMP trap service has to be configured to send traps to infosight and integrate performance data using VMvision.
- C. VMware vSphere storage API's array integration (VAAI)has to be configured to combine storage and VM performance metrics
- D. VMvision is an agentless integration into infosight and needs only the Vcenter server appliance credentials to connect. (page 112)
Answer: C
NEW QUESTION 71
Which storage sizing tool, designed specifically for the HPE 3PAR StoreServ environment, shows the expected deduplication ratio based on actual data analysis of the customer's current environment?
- A. NinjaThin
- B. NinjaStars
- C. NinjaCrawler
- D. StoreVista
Answer: B
NEW QUESTION 72
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?
- A. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
- B. Design an array with older version of the firmware to ensure compatibility
- C. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
- D. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
Answer: C
NEW QUESTION 73
When using a HPE 3 PAR Storeserv array to enable a user to apply array-based data services to specific application and VM's. What is the benefit of implementing VM-level gradually of Volts?
- A. Performance is accelerated by leveraging the deduplication capabilities built into the storage ASIC
- B. Data sprawls eliminated by performing the migration functions at the array level using 3PAR HPE Dynamic Optimization
- C. Efficiency is maintained by reclaiming space from deleted or migrated VMs using capabilities built into the storage ASIC
- D. Performing is accelerated by detecting and moving the most frequently -accessed VMs into the fast class tier
Answer: C
NEW QUESTION 74
What is the benefit of HPE Synergy? (Choose two.)
- A. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
- B. It can use HPE 3PAR File Persona for object storage.
- C. It can prevent block storage services from HPE 3PAR as part of the resource pool.
- D. It can compose and reclaim DAS storage.
- E. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
Answer: C,D
NEW QUESTION 75
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. F_PORT
- B. FL_PORT (WRONG)
- C. E_PORT (Correct)
- D. N_PORT
Answer: C
NEW QUESTION 76
A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?
- A. HPE SAN Network Advisor Enterprise
- B. HPE SAN Network Advisor Professional
- C. OneView Global Dashboard
- D. 3PAR Host Explorer
Answer: A
NEW QUESTION 77
A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer's concern?
- A. Persistent Checksum
- B. Persistent Cache
- C. Peer Persistence
- D. Persistent Ports
Answer: A
NEW QUESTION 78
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Persistent Cache
- B. Express Writes
- C. Express Indexing
- D. Zero Detect
Answer: B
NEW QUESTION 79
A customer with an HPE 3PAR StoreServ needs to upgrade their aging backup solution to a more advanced solution using snapshots and deduplication.
Which HPE products would meet the customer's needs? (Choose two.)
- A. HPE Recovery Manager Central
- B. HPE StoreOnce
- C. HPE 3PAR Remote Copy
- D. HPE StoreEver
- E. HPE 3PAR File Persona
Answer: A,B
NEW QUESTION 80
A customer needs to add another HPE 3PAR StoreServ system and plans to use the federated storage approach.
Which advantages can the customer expect? (Choose two.)
- A. federated deduplication
- B. allows multiple management tools
- C. load balancing
- D. reduced power, cooling, and environmental impacts
- E. easier migration
Answer: C,E
Explanation:
Federated storage-Move data between storage systems in a peer-to-peer relationship simply, dynamically, and nondisruptively to improve storage utilization, balance workloads, and ease storage migration.
NEW QUESTION 81
A customer is looking for a centralized file-sharing solution that can provide print services in addition to 15TB of storage.
Which solution component should you recommend?
- A. FC-based array
- B. Disk enclosure with integrated SAS switch
- C. FC switch
- D. NAS
Answer: D
NEW QUESTION 82
A customer needs to upgrade their HPE storage environment, including driver and firmware levels and OS, to the latest version.
Where can you find the needed information about supported versions?
- A. HPE Storage Assessment Foundry
- B. HPE OneView
- C. HPE SAN Design Reference Guide
- D. HPE SPOCK
Answer: D
NEW QUESTION 83
A large enterprise is experiencing exponential data growth of their existing Oracle databases.
They are concerned about their increasing backup windows and the risk of non-compliance with recovery time objectives increase of data corruption in primary storage. Their primary storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System.
Which HPE storage solution allow the customer to migrate this risk?
- A. StoreOnce unified deduplication
- B. RMC Express protect
- C. Catalyst in-Flight compression
- D. 3 PAR remote copy
Answer: B
NEW QUESTION 84
......
Get ready to pass the HPE0-J68 Exam right now using our HPE ASE Exam Package: https://www.surepassexams.com/HPE0-J68-exam-bootcamp.html
A fully updated 2021 HPE0-J68 Exam Dumps exam guide from training expert SurePassExams: https://drive.google.com/open?id=1xIaVm1PNA-wGJtJPwAqB9n7QWC57Z0jk