H35-561-ENU Training & Certification Get Latest HCNP-LTE RNP & RNO Updated on Sep 14, 2021
Certification Training for H35-561-ENU Exam Dumps Test Engine
NEW QUESTION 35
Regarding the description of TA, which is wrong?
- A. The TA list is sent to the UE when the bearer is activated.
- B. The purpose of using the TA list is to prevent the UE from frequently starting the Tracking Area Update (TAU) process.
- C. A TA list includes one or more TA
- D. In the EPS network, the basic unit of location management is the TA list (tracking area List)
Answer: A
NEW QUESTION 36
The PDSCH carries DL-SCH and PCH information.
- A. True
- B. False
Answer: A
NEW QUESTION 37
What are the measurement configuration messages of the E-UTRAN to UTRAN system handover based on coverage? (multiple choice)
- A. Measuring time
- B. Measuring object
- C. Measure GAP configuration
- D. UTRAN FDD filter coefficient
Answer: B,C,D
NEW QUESTION 38
For the single-station verification link, if the UE can access the network but cannot switch, which of the following steps can be taken to troubleshoot the cause? (Multiple choice)
- A. Check if the switching threshold is correct
- B. Check if the wireless signal is good, whether the RSRP and SINR values are too small, such as the reference value (RSRP > -90dBm, SINR > 5dB)
- C. Check if the attachment is normal
- D. Check if the neighboring area is configured
Answer: A,D
NEW QUESTION 39
Planning principles for LTE tracking area boundaries, which is wrong?
- A. When suburban and urban areas are not continuously covered, separate suburban areas and urban areas use separate location areas.
- B. Consider the end user's mobile behavior in the planning (such as the main traffic, railway and other high traffic areas as little as possible across the boundary)
- C. Location area can span MME/MSC
- D. The location where the location update signaling overhead is frequent is located in the area where the traffic volume is low, which is beneficial for the eNB to have sufficient resources to handle additional location update signaling overhead.
Answer: C
NEW QUESTION 40
What is the maximum about the FDD mode when the uplink and downlink 1:3 matching the peak rate of TDD LTE system?
- A. 75%
- B. 60%
- C. 50%
- D. 85%
Answer: D
NEW QUESTION 41
Which of the following VoIP- related KPI indicators can the eNodeB provide?
- A. Number of active users of VoIP
- B. VoIP call drop rate
- C. VoIP service packet loss rate
- D. VoIP handover success rate
Answer: A,B,C,D
NEW QUESTION 42
What are the indicators for switching to premature problem analysis? (Multiple choice)
- A. The inter-cell handover between the eNodeBs that are rebuilt back to the non-source cell is successful.
- B. Switching out premature times between two specific cells
- C. The number of execution successes is switched by the same frequency between the elNodeBs of the re-established returning source cell.
- D. The number of execution successes is switched by the same frequency in the eNodeB of the re-established returning source cell.
Answer: B,D
NEW QUESTION 43
Which of the following wireless network planning goals will not affect the results of coverage estimates?
- A. Target user type
- B. Target coverage probability
- C. Target business edge throughput
- D. Network target load
Answer: A
NEW QUESTION 44
What is the scheduling period of the MIB?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 45
Which of the following adjustment measures has the highest priority?
- A. Antenna direction angle antenna downtilt angle
- B. Antenna height
- C. Antenna type
Answer: C
NEW QUESTION 46
Which of the following parameters does not affect the triggering of the event measurement report?
- A. Cell Individual Offset
- B. Neighborhood relationship
- C. Filter coefficient
- D. Threshold for RSRP
Answer: C
NEW QUESTION 47
Assuming that the UE-ID is 515, the paging period is 256 frames, and Nb is 1T, which of the following frames may be the PF paging frame of the UE? (Multiple choice)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: A,B
NEW QUESTION 48
Which of the following core network elements does CSFB have?
- A. PGW
- B. SGW
- C. MME
- D. MSC
Answer: C,D
NEW QUESTION 49
In LTE, what is the correlation between a ZC sequence and any cyclic shift (CS) of the same sequence?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 50
Regarding VOLTE called anchoring, which of the following descriptions is wrong?
- A. refers to the process of anchoring the VoLTE user under the CS network access to the IMS network to obtain the IMS service. The process of calling the user at the CS to route the call from the CS network to the IMS network for service processing
- B. The caller may not be anchored when the caller is not in an LTE call.
- C. Domain selection and anchoring may occur simultaneously
- D. There are two anchoring methods: TMRN front and IMRN
Answer: A
NEW QUESTION 51
Which of the following network elements is initiated by CSFB called process?
- A. SGSN
- B. MSC
- C. MME
- D. SWG
Answer: C
NEW QUESTION 52
Which of the following indicators can monitor whether wireless coverage is limited? (Multiple Choice)
- A. MCS indicator
- B. CCE indicator
- C. User number indicator
- D. PRB indicator
Answer: B,D
NEW QUESTION 53
Which of the following is the length of conventional CP in TD-LTE system physical layer?
- A. 4.69 µs
- B. 9.77 µs
- C. 16.67 µs
- D. 33.33 µs
Answer: A
NEW QUESTION 54
In which of the following messages, the tracking area information will be sent to the MME for consistency check?
- A. SIAP : Initial context setup request
- B. SIAP : E-RAB setup request
- C. RRC : RRC connection request
- D. SIAP : S1 setup request
Answer: D
NEW QUESTION 55
......
Step by Step Guide to Prepare for H35-561-ENU Exam: https://www.surepassexams.com/H35-561-ENU-exam-bootcamp.html