Try NCP-MCI-5.15 Free Now! Real Exam Question Answers Updated [Sep 28, 2022]
Get Ready to Pass the NCP-MCI-5.15 exam with Nutanix Latest Practice Exam
NEW QUESTION 20
Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?
- A. allssh show_uplinks
- B. allssh manage_ovs show_uplinks
- C. manage ovs show uplinks
- D. manage_ovs show_uplinks
Answer: B
NEW QUESTION 21
What is the name of the internal bridge used by AHV nodes and CVMs?
- A. br0
- B. vnet0
- C. virbr0
- D. br1
Answer: C
NEW QUESTION 22
Which Nutanix cluster service manages VM access to the Distributed Storage Fabric?
- A. Acropolis
- B. Stargate
- C. Medusa
- D. Pithos
Answer: B
NEW QUESTION 23
An administrator needs to determine current CPU usage across multiple clusters.
Which method should the administrator use to generate this type of report?
- A. Prism Central, Home, Manage Dashboards
- B. Prism Central, Explore, Clusters
- C. Prism Central, Home, Add Widgets
- D. Prism Central, Explore, Hosts
Answer: C
NEW QUESTION 24
Which CVM service is primary responsible for handling all metadata operation with a Nutanix cluster?
- A. Cassandra
- B. Stargate
- C. Genesis
- D. Zeus
Answer: A
NEW QUESTION 25
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?
- A. Over-Provision the application VM with additional virtual GPUs.
- B. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
- C. Create a sperate three-node cluster using the nodes that meet the requirement.
- D. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
Answer: C
NEW QUESTION 26
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?
- A. the minimum RPO 8 hours required
- B. Supported hardware is NX-1175-G5 and G6
- C. Witness vm required to break cluster quoram
- D. witness vm should be 8vcp and 20gb ram
Answer: B
Explanation:
Reference:
https://www.nutanix.com/blog/unlocking-the-roboedge-it-landscape-with-the-launch-of-nutanix-1-node-cluster
NEW QUESTION 27
An administrator needs to move a Nutanix host from one cluster to another.
Which step should the administrator take after evacuating VMs from the host to be moved?
- A. From the Task menu in Prism, select Cluster details, then un-check the host from the list
- B. In Prism, highlight the host in the Hardware pane and select Remove from Metadata Ring
- C. In Prism, highlight the host in the Hardware pane and select Remove Host
- D. From the Task menu in Prism, select Licensing hen delete the host license.
Answer: C
NEW QUESTION 28
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Migrate a cluster
- B. Destroy a cluster.
- C. Move Nodes between clusters.
- D. Upgrade a cluster
- E. Remove a Node from a cluster
Answer: B,C,E
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_managing_c.html Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
* You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
* Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
* You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
* You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION 29
The feature that enables you to back up and restore copies of virtual machines and files to and from an on-prem cluster and a Nutanix Controller VM on the Amazon Web Service (AWS) or Microsoft Azure cloud.
- A. Acropolis Block Service
- B. Cloud Connect
- C. XI-Leap
Answer: B
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v55%3Awc-remote-site-configuration-c.html
NEW QUESTION 30
A customer wants to isolate a group of VMs within their Nutanix environment for security reasons. The customer creates a VM with two NICs to act as a firewall and installs the appropriate software and certificates.
However, no one from the outside can access the application.
What is the likely cause of this problem?
- A. A shared volume group must be used by all isolated VMs
- B. More than one NIC cannot be added to a VM
- C. Wireshark is installed on the NAT VM
- D. One of the NICs needs to be configured on the internal VLAN
Answer: D
NEW QUESTION 31
An administrator has a 5-node cluster configured for RF2 with 200 TB of raw disk space. The administrator decides to enable Erasure Coding to gain additional usable space.
Approximately how much usable space would be available after enabling Erasure Coding?
- A. 150 TB
- B. 100 TB
- C. 175 TB
- D. 125 TB
Answer: A
NEW QUESTION 32
An organization has a 3-node cluster, with utilization rates as follows:
* 35% CPU
* 40% RAM
* 20% SSD
* 35% HDD
A node in this cluster fails.
Which type of degradation will the client experience due to this node failure?
- A. The cluster will be online but will experience performance issues due to utilization.
- B. All VMs from that node will be offline until the node is repaired.
- C. VMs from the failed node will be offline until they restart on the remaining nodes.
- D. The entire cluster will be down until the node is repaired.
Answer: C
NEW QUESTION 33
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Syslog
- B. Individual Alerts
- C. Email Digest
- D. SNMP
Answer: C
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central to sent alert emails.
* Check the Email Every Alert box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 34
What is default behavior for VM High Availability for Nutanix AHV?
- A. Only VMs with High Availability explicitly enabled will restart
- B. VMs restart on other hosts as available resource allow
- C. No VMs restart because HA is not enabled by default
- D. All VMs restart because system reservation are already made
Answer: B
NEW QUESTION 35
An administrator is preparing to migrate VMs from a legacy ESXi cluster to a new AHV cluster.
Which action must be the administrator perform on the AHV cluster to migrate VM data?
- A. Create placeholder VMs
- B. Install the Nutanix Virt0 drivers
- C. Install Nutanix Self servicing restore.
- D. Whitelist the ESXi cluster IP address
Answer: D
NEW QUESTION 36
what is included in, or enabled by, the nutanix NGT bundle? (Choose two)
- A. crash consistent snapshot
- B. mobility drivers
- C. application consistent snapshot
- D. mouse and keyboard emulation
Answer: B,C
NEW QUESTION 37
An administrator has set up a local web server accessible to the Nutanix clusters.
Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)
- A. Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.
- B. Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.
- C. Edit LCM Advanced Settings in Prism Element and enter the address of the web server.
- D. Edit LCM Advanced Settings m Prism Central and enter the address of the web server.
Answer: A,C
NEW QUESTION 38
An administrator cables all interfaces on a newly added AHV host and starts migrating VM to 4. Users report that network connections are much slower to the VMs after the migration.
What is a possible reason for this issue.?
- A. The host still has the default bond configuration.
- B. The network is slower because the host is further away.
- C. The CVM on the node has not fully joined
- D. The VMs do not use the same interfaces as the CVM.
Answer: A
NEW QUESTION 39
An administrator migrates a Windows VM from an ESXi host to a Nutanix AHV cluster. When powered on, the migrated VM fails to start. The VM console shows the error message:
Cannot locate boot device
What should the administrator confirm to identify the reason that the VM fails to boot?
- A. Nutanix Virt IO drivers were installed on the VM pre-migration.
- B. The Windows OS is at a supported patch level.
- C. The ESXi source cluster can ping the destination AHV cluster.
- D. VM snapshots on the source cluster were consolidated.
Answer: A
NEW QUESTION 40
Where should an administrator unregister Prism Element from Prism Central?
- A. From a CVM SSH session
- B. From the Prism Central web console
- C. From the Prism Element web console
- D. From a Host SSH session
Answer: A
NEW QUESTION 41
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.
Answer:
Explanation:
Reference:
https://next.nutanix.com/how-it-works-22/scheduled-power-outage-relocating-cluster-hardware-if-you-need-to-shut-down-all-the-nodes-in-your-ahv-cluster-here-s-how-37326
NEW QUESTION 42
......
What is difficult to write the Nutanix NCP-MCI-5.15 Exam
It is difficult to write the exam. It is not easy to select the right topics. Some people cannot write well. You can use this product to pass the exam. Nutanix NCP-MCI-5.15 will help you understand all the questions that will be asked in the exam. Practice tests contain questions from the actual exam. You can use the practice exams to prepare for the exam. You will not lose marks if you do not have enough time to study. You must have a good memory and strong ability to solve problems. Valid and Correct answers are included in this product. Dump and PDF are included in this product. Nodes of Nutanix Enterprise Cloud Platform is the main topic of this exam. Servers of Nutanix Enterprise Cloud Platform are used to run the system. Affinity policy of Nutanix Enterprise Cloud Platform is very useful. Operations and services of Nutanix Enterprise Cloud Platform are used to manage the system.
What are the Key Features of Nutanix NCP-MCI-5.15 Certification Exam
The candidates must pass Nutanix Certified Professional. Multi-Cloud Infrastructure (NCP-MCI) exam to become certified. This exam tests the candidate's ability to configure, manage and monitor a Nutanix Enterprise Cloud Platform. Certification provides practical knowledge and hands-on experience of the components of the Nutanix Enterprise Cloud Platform and their configuration and operation. All Nutanix products are tested during the examination process
Following is the info about the Passing Score, Duration & Questions for the Nutanix NCP-MCI-5.15 Exam
- Number of Questions: 200 questions
- Time Duration: 180 minutes
- Languages: English
- The passing score: 80%
Pass Your Next NCP-MCI-5.15 Certification Exam Easily & Hassle Free: https://www.surepassexams.com/NCP-MCI-5.15-exam-bootcamp.html