[Sep-2021] Valid Way To Pass Juniper Exam Dumps with JN0-362 Exam Study Guide
All JN0-362 Dumps and Service Provider Routing and Switching, Specialist (JNCIS-SP) Training Courses Help candidates to study and pass the Exams hassle-free!
NEW QUESTION 24
Which two statements are true when considering logical systems? (Choose two.)
- A. Logical systems share the master routing table and can create routing instances
- B. Logical systems do not support nonstop active routing
- C. Logical systems provide management separation by providing user access per logical system
- D. Logical tunnels cannot be used to connect logical systems
Answer: C,D
NEW QUESTION 25
Which two statements correctly describe the BGP community attribute? (Choose two.)
- A. Only one community can be associated with a route.
- B. The community attributes is an optional transitive attribute.
- C. The community attribute is an optional nontransitive attribute.
- D. Multiple communities can be associated with a route.
Answer: B,D
NEW QUESTION 26
Which two statements reflect benefits of performing per-flow load balancing over per-packet load balancing? (Choose two.)
- A. Provides easier implementation of class of service policies.
- B. All physical links in the network are used equally.
- C. Allows the destination host to re-order packets and increase performance.
- D. Packets arrive at the destination in the order they were sent.
Answer: A,D
NEW QUESTION 27
You must configure an MX Series device to receive and forward a mixture of single-tag and dual- tag frames on interface xe-0/0/0.
In this scenario what will accomplish goal?
- A. xe-0/0/0 {stacked-vlan-tagging;}
- B. xe-0/0/0 {vlan-vci-tagging;}
- C. xe-0/0/0 {flexible-vlan-tagging;}
- D. xe-0/0/0 {vlan-tagging;}
Answer: C
NEW QUESTION 28
What is the purpose of STP BPDUs?
- A. to determine the root bridge
- B. to determine the root-alternate port
- C. to determine the least cost path
- D. to exchange MAC addresses
Answer: C
NEW QUESTION 29
By default, which RSVP reservation style is used by the Junos OS?
- A. shared explicit
- B. wildcard filter
- C. fixed explicit
- D. fixed filter
Answer: D
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The local-address statement is required for the BGP session to establish correctly
- B. The local-address statement is not required for the BGP session to establish correctly
- C. The configuration is for an internal BGP session
- D. The configuration is for an external BGP session
Answer: A,C
NEW QUESTION 31
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It does not support multihop
- B. Interface Lo0 must be used for peering
- C. Neighbors can be located anywhere within the AS
- D. It is loop free by default
Answer: C,D
NEW QUESTION 32
Which statement is true about the operation of Layer 2 VPNs?
- A. Service provider routers must evaluate the IP header of packets as they traverse their network
- B. Layer 2 VPNs do not permit CE devices to operate a Layer 3 protocol with each other
- C. Layer 2 VPNs require that CE devices use the same Layer 2 encapsulation
- D. Layer 2 VPNs allow CEs to use different encapsulations on either side of the VPN
Answer: D
NEW QUESTION 33
According to Juniper Networks, what are two reasons to peer using loopback addresses when configuring BGP? (Choose two.)
- A. When establishing an IBGP connection
- B. When establishing a single-link EBGP connection
- C. When routers are not directly connected
- D. When routers are not in the same autonomous system
Answer: A,C
NEW QUESTION 34
Click the Exhibit.
Referring to the configuration in the exhibit, which statement is true?
- A. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- B. The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route
192.168.5.0/24 to be active. - C. The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.
- D. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
Answer: B
NEW QUESTION 35
What happens when a packet matches a static route with the next hop parameter set to reject?
- A. The packet is forwarded and the packet is marked as rejected in the header
- B. An ICMP message is sent to the source and the packet is dropped
- C. The system silently drops the packet
- D. An ICMP message is sent to the source and the packet is forwarded
Answer: B
NEW QUESTION 36
What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)
- A. Trunk interface
- B. GRE tunnel interface
- C. Logical tunnel interface
- D. Access interface
- E. Layer 2 logical interface
Answer: A,D,E
NEW QUESTION 37
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)
- A. Forwarding Delay
- B. Hello Time
- C. Message Age
- D. Max Age
Answer: C,D
NEW QUESTION 38
Which statement about a virtual-routertype of routing instance is correct?
- A. It is used to separate large networks into smaller administrative entities
- B. It is the only routing instance type supported on Junos devices
- C. It is used to create and maintain separate routing and forwarding tables
- D. It is used in Layer 3 VPN implementations
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 39
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 4
- B. Router 1
- C. Router 2
- D. Router 3
Answer: A
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The BGP peerings between R1, R2, and R3 should use loopback interface addresses
- B. The BGP peerings between R1, R2, and R3 should use physical interface addresses
- C. The BGP peering between R1 and R4 should use loopback interface addresses
- D. The BGP peering between R1 and R4 should use physical interface addresses
Answer: A,D
NEW QUESTION 41
Which IPv6 extension header notifies intermediary devices that they must inspect the packet's options?
- A. routing header
- B. hop-by-hop options header
- C. fragment header
- D. destination options header
Answer: A
NEW QUESTION 42
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area.Which three LSA types does Router B suppress from Area 2? (Choose Three.)
- A. External LSA
- B. Network LSA
- C. ASBR Summary LSA
- D. Router LSA
- E. Summary LSA
Answer: A,C,E
NEW QUESTION 43
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)
- A. MPLS
- B. IS-IS
- C. OSPF
- D. BGP
Answer: B,C
NEW QUESTION 44
Which two statements are true about IBGP on MX Series devices? (Choose two.)
- A. It does not support multihop
- B. Interface Lo0 must be used for peering
- C. Neighbors can be located anywhere within the AS
- D. It is loop free by default
Answer: C,D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-ibgp-peering.html
NEW QUESTION 45
......
Get Latest [Sep-2021] Conduct effective penetration tests using SurePassExams JN0-362