2023 Valid 300-425 test answers & Cisco Exam PDF
Free Cisco 300-425 Exam Questions and Answer from Training Expert SurePassExams
NEW QUESTION 53
A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network. Which type of wireless architecture is being used?
- A. unified deployment
- B. autonomous deployment
- C. distributed deployment
- D. centralized deployment
Answer: D
Explanation:
NEW QUESTION 54
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)
- A. access point
- B. ladder
- C. PoE battery
- D. spirit level
- E. tall tripod
- F. goggles
Answer: A,C,E
NEW QUESTION 55
Drag and drop the characteristics from the left onto the correct functionalities on the right.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS
NEW QUESTION 56
A user is having issues accessing file shares on a network. The network engineer advises the user to open a web browser, input a prescribed IP address, and follow the instructions. After doing this, the user is able to access company shares. Which type of remote access did the engineer enable?
- A. VPDN client access
- B. SSL VPN client access
- C. Ipsec VPN client access
- D. EZVPN
Answer: B
Explanation:
The Cisco AnyConnect VPN Client provides secure SSL connections to the security appliance for remote users. Without a previously installed client, remote users enter the IP address in their browser of an interface configured to accept SSL VPN connections. Unless the security appliance is configured to redirect http:// requests to https://, users must enter the URL in the form https://<address>.
After entering the URL, the browser connects to that interface and displays the login screen. If the user satisfies the login and authentication, and the security appliance identifies the user as requiring the client, it downloads the client that matches the operating system of the remote computer. After downloading, the client installs and configures itself, establishes a secure SSL connection and either remains or uninstalls itself (depending on the security appliance configuration) when the connection terminates.
Reference: http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/100936-asa8x-split-tunnel-anyconnect-config.html
NEW QUESTION 57
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. transmit power considerations
- B. aesthetics
- C. power supply considerations
- D. antenna gain
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551
NEW QUESTION 58
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?
- A. redundant controllers in the least restrictive regulatory domain
- B. one controller per continent
- C. redundant controllers in the most restrictive regulatory domain
- D. one controller per country code
Answer: D
Explanation:
AP regulatory domain is set when shipped, this can't be changed. Country codes are changed manually on the WLC, not the regulatory domain. The country set must be in the regulatory domain of any associated APs. There is no setting for continent.
NEW QUESTION 59
Refer to the exhibit.
Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
- A. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
- B. It shows the map editor feature in Cisco Prime Infrastructure.
- C. It shows the planning mode feature in Cisco Prime Infrastructure.
- D. It presents the recommended number of APs for the selected coverage area based on the selections made.
- E. Planning mode requires a special license in Cisco Prime Infrastructure.
Answer: A,C
Explanation:
NEW QUESTION 60
The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones. Which two settings accomplish this goal? (Choose two.)
- A. Configure AVC profile on new SSID.
- B. Configure mobility groups between WLCs.
- C. Use AVC to tag traffic voice traffic as best effort.
- D. Use Cisco Centralized Key Management for authentication.
- E. Configure AP groups between WLCs.
Answer: B,D
NEW QUESTION 61
Refer to the exhibit.
Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
- A. It presents the recommended number of APs for the selected coverage area based on the selections made.
- B. It shows the map editor feature in Cisco Prime Infrastructure.
- C. It shows the planning mode feature in Cisco Prime Infrastructure.
- D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
- E. Planning mode requires a special license in Cisco Prime Infrastructure.
Answer: A,C
Explanation:
NEW QUESTION 62
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?
- A. IP protocol 97
- B. UDP port 97
- C. TCP port 97
- D. UDP port 16666
Answer: D
Explanation:
NEW QUESTION 63
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity. 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?
- A. The critical priority access point count is oversubscribed.
- B. network ap-priority is set to disable.
- C. The high priority access point is oversubscribed.
- D. network ap-priority is set to enable.
Answer: C
Explanation:
Section: WLAN High Availability
Explanation/Reference:
NEW QUESTION 64
Refer to the exhibit.
An engineer determined that during a recent controller failure, some APs did not failover to their secondary controller based on the network design, which has sufficient licenses for all APs. The controllers are not in a mobility group but have A records for their hostnames in DNS. Which setting needs to be addressed?
- A. The controllers must be in the same mobility group.
- B. DNS hostnames are required to be FQDN.
- C. The AP failover priority was not set high enough.
- D. The secondary controller IP address is incorrect.
Answer: C
NEW QUESTION 65
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
- A. Deploy environmentally friendly cabling components to blend into the environment.
- B. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
- C. Paint the access point to cover the LED from being noticeable.
- D. Use enclosures to hide the wireless infrastructure in the surrounding environment.
Answer: A
Explanation:
NEW QUESTION 66
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer select?
- A. 802.11ac
- B. 802.11e
- C. 802.11r
- D. 802.11i
Answer: C
Explanation:
Section: Mobility
NEW QUESTION 67
Campus users report a poor wireless experience. An engineer investigating the issue notices that in high-density areas, the wireless clients fail to switch the AP to which are automatically connected. This sticky client behavior is causing roaming issues. Which feature must the engineer configure?
- A. optimized roaming
- B. Layer 2 roaming
- C. Load balancing and band select
- D. Layer 3 roaming
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/80/hdx_final/b_hdx_dg_final/high_density_experience_features_added_in_release_8_0.html
NEW QUESTION 68
An engineer is using a Cisco AIR-2702i AP lo conduct a Layer l site survey. Which mode is selected for the AP to discover non Wi-Fi interference with Metageek Chanaryzer?
- A. Sniffer
- B. SE-Connect
- C. Monitor
- D. FlexConnect
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010001001.html
NEW QUESTION 69
A network engineer is asked to configure a "site-to-site" Ipsec VPN tunnel. One of the last things that the engineer does is to configure an access list (access-list 1 permit any) along with the command ip nat inside source list 1 int s0/0 overload. Which functions do the two commands serve in this scenario?
- A. The command access-list 1 permit any defines only one machine that is allowed through the tunnel.
- B. The command access-list 1 defines interesting traffic that is allowed through the tunnel.
- C. The command ip nat inside source list 1 int s0/0 overload disables "many-to-one" access for all devices on a defined segment to share a single IP address upon exiting the external interface.
- D. The command ip nat inside source list 1 int s0/0 overload provides "many-to-one" access for all devices on a defined segment to share a single IP address upon exiting the external interface.
Answer: D
Explanation:
Configuring NAT to Allow Internal Users to Access the Internet Using Overloading
Note in the previous second configuration, the NAT pool "ovrld"only has a range of one address. The keyword overload used in the ip nat inside source list 7 pool ovrld overload command allows NAT to translate multiple inside devices to the single address in the pool.
Reference: http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml
NEW QUESTION 70
Why is 802.11a connectivity reduced in an X-ray room?
- A. X-ray rooms exhibit increased signal attenuation.
- B. X-rays impact the 802,11a UNll-2 channels that cause access points to dynamically change channels.
- C. X -rays within these rooms cause multipath issues.
- D. X-rays create significant non-Wi-Fi interference on the 802.11a band.
Answer: D
Explanation:
portable X-ray machines, sending high-resolution images, sometimes in real time, echography machines, and electrocardiography [ECG] machines). These devices may also use the same spectrum as Wi-Fi but with other protocols and, therefore, become sources of interference for your system.
NEW QUESTION 71
A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design to encourage clients to use the 5 GHz spectrum?
- A. Band Select
- B. RRM
- C. Cisco Centralized Key Management
- D. load balancing
Answer: A
Explanation:
NEW QUESTION 72
An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)
- A. LSS
- B. DFS
- C. TPC
- D. TSPEC
- E. RXSOP
Answer: B,C
NEW QUESTION 73
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
- A. roaming design model
- B. high-density design model
- C. location design model
- D. voice design model
Answer: D
Explanation:
Section: Wired and Wireless Infrastructure
NEW QUESTION 74
......
What are the preparation guide for the Cisco 300-425 Certification
Best preparation guide For Cisco 300-425 Certification
Check out Cisco 300-425 Certification
The Cisco 300-425 certification is a professional certification for individuals who seek to become certified as CCENT professionals. The exam consists of questions related to networking, Linux/Unix commands, and security fundamentals. Individuals who pass the certification are qualified for jobs in network support or help desk areas. Those who pass the CAMS exam with the help of Cisco 300-425 Dumps gain several benefits. This article is about Cisco 300-425 Certification. It provides you with information on the certification and the steps to take in order to succeed in acquiring it.
Top Cisco 300-425 Courses Online: https://www.surepassexams.com/300-425-exam-bootcamp.html
300-425 Practice Dumps - Verified By SurePassExams Updated 113 Questions: https://drive.google.com/open?id=1DYZyUnntiLNaggu-YMcym1FJkOOqs_P4