JN0-1102 Dumps Updated Dec 12, 2021 Practice Test and 263 unique questions [Q123-Q138]

Share

JN0-1102 Dumps Updated Dec 12, 2021 Practice Test and 263 unique questions

2021 Latest 100% Exam Passing Ratio - JN0-1102 Dumps PDF 


Juniper JN0-1102 Exam Certification Details:

Exam NameDesign Associate
Exam CodeJN0-1102 JNCDA
Sample QuestionsJuniper JN0-1102 Sample Questions
Passing ScoreVariable (60-70% Approx.)
Recommended TrainingJuniper Networks Design Fundamentals (JNDF)
Number of Questions65
Duration90 minutes
Exam Price$200 USD
Exam RegistrationPEARSON VUE

 

NEW QUESTION 123
What are three components of an RFP? (Choose three.)

  • A. a list of design requirements
  • B. the types of solutions that the design must include
  • C. a list of devices to meet the design requirements
  • D. a list of available IP addresses within their current IP allocation
  • E. general information about the existing network environment

Answer: A,B,E

 

NEW QUESTION 124
Which two statements are true regarding a Virtual Chassis? (Choose two.)

  • A. A Virtual Chassis supports only two participating devices.
  • B. A Virtual Chassis must be configured on the same series but not the same model.
  • C. A Virtual Chassis supports up to 10 participating devices.
  • D. A Virtual Chassis can be configured on mixed series and models.

Answer: C,D

 

NEW QUESTION 125
You are reviewing an existing corporate network design with a plan to reduce the number of data centers deployed by a customer.
Which three considerations are relevant to this exercise? (Choose three.)

  • A. data repositories/distribution
  • B. cable plant infrastructure
  • C. data center interconnects
  • D. high availability considerations
  • E. RFC1918 addressing

Answer: A,C,D

 

NEW QUESTION 126
What are three components used to enforce 802.1X in your design? (Choose three.)

  • A. edge router
  • B. supplicant
  • C. authenticator
  • D. VoIP phone
  • E. authentication server

Answer: B,C,E

 

NEW QUESTION 127
What is an example of a port-based network access control protocol?

  • A. 802.1x
  • B. 802.1q
  • C. 802.1r
  • D. 802.3x

Answer: A

 

NEW QUESTION 128
What are three ways to secure a customer's network that includes several retail stores? (Choose three.)

  • A. Isolate sensitive data from devices that access the network using security zones.
  • B. Ensure that the network meets PCI compliance.
  • C. Provide guest access on a separate VLAN protected by NAC.
  • D. Use 802.11g to isolate sensitive data from devices that access the network.
  • E. Secure cashier access from branch locations by requiring BYOD.

Answer: A,B,C

 

NEW QUESTION 129
Your customer is building a new data center and the applications require very low latency.
Which fabric architecture would you recommend?

  • A. four tier
  • B. spine-and-leaf
  • C. three tier
  • D. hub-and-spoke

Answer: B

 

NEW QUESTION 130
Which solution ensures data security in this environment?

  • A. Use MACsec on all inter-switch connections.
  • B. Use LACP on all inter-switch connections.
  • C. Use LLDP on all inter-switch connections.
  • D. Use PNAC on all inter-switch connections.

Answer: D

 

NEW QUESTION 131
In which two situations does physical device redundancy make sense in a network design? (Choose two.)

  • A. When device failures in the customer's WAN provider are a possibility.
  • B. When zero impact to users and applications is required during device failures.
  • C. When downtime is not acceptable for device upgrades.
  • D. When server load in the DMZ is a is higher than normal.

Answer: B,C

 

NEW QUESTION 132
What should be the third item in your network design checklist?

  • A. A process for understanding the customer's business and technical goals.
  • B. A validation process for analyzing customer's existing environment.
  • C. A process for selecting protocols, address schemes, naming conventions, and so forth.
  • D. The steps for designing a network topology.

Answer: D

 

NEW QUESTION 133
What are two rules you should follow when writing an executive summary of an RFP? (choose two.)

  • A. Canned responses are ok to use.
  • B. Keep it short and simple.
  • C. Focus on organizational issues.
  • D. Give a history of Juniper Networks.

Answer: B,C

 

NEW QUESTION 134
You are asked to deploy VPNs in your network.
What are two deployment models you would use? (Choose two.)

  • A. overlay
  • B. site to site
  • C. hierarchical
  • D. hub and spoke

Answer: B,D

 

NEW QUESTION 135
Your campus network is rolling out a BYOD policy. Your design must ensure that guest users are restricted from accessing internal network resources.
Which two actions would solve this problem? (Choose two.)

  • A. Guest users should be placed in an isolated guest VLAN.
  • B. Guest users should be placed in a non-isolated guest routing instance.
  • C. Guest users should be placed in an isolated guest routing instance.
  • D. Guest users should be placed in a non-isolated guest VLAN.

Answer: A,C

 

NEW QUESTION 136
Which statement describes a data center is right?

  • A. The data center encompasses a broad area that is used to interconnect business locations and resources.
  • B. The data center typically involves high density topologies with multiple points of access.
  • C. The data center houses the computing resources and services used by a company.
  • D. The data center locally hosts thousands of users with wired connections, all with three to four active devices.

Answer: C

 

NEW QUESTION 137
What are two tiers used in a traditional data center design? (Choose two.)

  • A. core
  • B. user
  • C. compute
  • D. aggregation

Answer: A,D

 

NEW QUESTION 138
......


Juniper JN0-1102 Exam Topics:

SectionObjectives
Securing the Network-Identify security design principles
Network Automation and Management-Describe design considerations for network automation
-Describe design considerations for network management strategies
Network Design Architectures-Describe considerations for a campus or branch network
-Describe considerations for a WAN
-Describe considerations for a data center
Customer Network Design Requirements-Identify initial network design requirements
Business Continuity-Identify network design considerations for business continuity

 

Verified JN0-1102 dumps Q&As - 100% Pass from SurePassExams: https://www.surepassexams.com/JN0-1102-exam-bootcamp.html

Pass Exam With Full Sureness - JN0-1102 Dumps with 263 Questions: https://drive.google.com/open?id=1xw7w86JSX8NsfycMsjcZs2QZ_Jl1UnBV