Juniper New 2022 JN0-635 Test Tutorial (Updated 90 Questions)
JN0-635 Exam Questions Dumps, Selling Juniper Products
Recertification Details
You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.
Overview of JN0-635 Exam Content
There are various subject areas that you need to be skilled at before you can take the final JN0-635 exam:
- How Security Policy and Security Zone Troubleshooting works;
- Application and Functions of Advanced IPsec.
- Threat Mitigation Techniques;
- Concepts of Layer 2 Security;
- NAT;
- Concepts of Firewall Filters and ACLs;
- Tenant and Logical Systems;
- Security Compliance;
- Concepts and features of Juniper ATP;
- Edge Security Features;
NEW QUESTION 35
Click the Exhibit button.
A host is unable to communicate with a webserver. Referring to the exhibit, which statement is correct?
- A. The session table is running out of resources
- B. The webserver is not listening for traffic on port 80
- C. A policy is denying the traffic between these two hosts
- D. A session is created for this flow
Answer: C
NEW QUESTION 36
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. BGP
- B. IKEv1
- C. shortcut partner
- D. OSPF
- E. shortcut suggester
Answer: C,D,E
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Source NAT with PAT is occurring
- B. Static NAT without PAT is occurring
- C. Destination NAT is occurring
- D. Source NAT without PAT is occurring
Answer: A
NEW QUESTION 38
Click the Exhibit button.
A user reports trouble when using SSH to a server outside your organization. The traffic traverses an SRX Series device that is performing NAT and applying security policies.
Referring to the exhibit, which configuration will allow you to see the bidirectional flow through the SRX Series device?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 39
You have designed the firewall filter shown in the exhibit to limit SSH control traffic to yours SRX Series device without affecting other traffic.
Which two statement are true in this scenario? (Choose two.)
- A. The filter should be applied as an input filter on the loopback interface.
- B. Applying the filter will not achieve the desired result.
- C. Applying the filter will achieve the desired result.
- D. The filter should be applied as an output filter on the loopback interface.
Answer: A,B
Explanation:
Reference:
https://www.juniper.net/documentation//en_US/junos/topics/concept/firewall-filter-ex-series-evaluation-understanding.html
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, you are attempting to enable IPsec power mode to improve IPsec VPN performance. However, you are unable to use IPsec power mode.
What is the problem?
- A. IPsec power mode cannot be used with IPsec performance acceleration
- B. IPsec power mode requires that you configure a policy-based VPN
- C. IPsec power mode cannot be used with advanced services
- D. IPsec power mode cannot be used with high IPsec maximum segment size values
Answer: C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation//en_US/junos/topics/reference/configuration-statement/ security-flow-power-mode-ipsec.html
NEW QUESTION 41
You must troubleshoot ongoing problems with IPsec tunnels and security policy processing. Your network consists of SRX340s and SRX5600s.
In this scenario, which two statements are true? (Choose two.)
- A. You must enable data plane logging on the SRX5600 devices to generate security policy logs
- B. IPsec logs are written to the kmd log file by default
- C. IKE logs are written to the messages log file by default
- D. You must enable data plane logging on the SRX340 devices to generate security policy logs
Answer: A,B
NEW QUESTION 42
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
- C. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- D. The SRX1500 device does not support more than two logical interfaces per tenant system
Answer: B
NEW QUESTION 43
Which Junos security feature is used for signature-based attack prevention?
- A. AppQoS
- B. IPS
- C. RADIUS
- D. PIM
Answer: B
NEW QUESTION 44
You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)
- A. Create a temporary admin account.
- B. Enable JTAC remote access
- C. Create a temporary root account.
- D. Enable a JATP support account.
- E. Enable remote support.
Answer: A,D,E
Explanation:
Reference:
https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false
NEW QUESTION 45
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit interfaces]
user@srx# delete st0.0 multipoint - B. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable - C. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only - D. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner
Answer: B,D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 46
When would you use the port-overloading-factor 1 setting?
- A. to set the maximum port-overloading capacity to 65,536
- B. to disable the port-overloading
- C. to enable the port-overloading
- D. to map ports with 1:1 ratio for port-overloading
Answer: B
NEW QUESTION 47
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of four interfaces.
- B. The collector must have a minimum of two interfaces.
- C. The collector must have a minimum of three interfaces.
- D. The collector must have a minimum of five interfaces.
Answer: A
NEW QUESTION 48
Click the Exhibit button.
A user is trying to reach a company's website, but the connection errors out. The security policies are configured correctly.
Referring to the exhibit, what is the problem?
- A. DNS ALG must be disabled
- B. The action for rule 1 must change to static-nat inet
- C. Static NAT is missing a rule for DNS server
- D. Persistent NAT must be enabled
Answer: C
NEW QUESTION 49
Click the Exhibit button.
You have configured an ADVPN that is operational. However, OSPF will not establish correctly across the ADVPN tunnels.
Referring to the exhibit, which two commands will solve the problem? (Choose two.)
- A. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 topology advpn - B. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 dynamic-neighbors - C. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 interface-type nbma - D. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 demand-circuit
Answer: B,D
NEW QUESTION 50
Your organization has multiple Active Directory domain to control user access. You must ensure that security polices are passing traffic based upon the user's access rights.
What would you use to assist your SRX series devices to accomplish this task?
- A. JSA
- B. JATP Appliance
- C. JIMS
- D. Junos Space
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-user-auth-configure-jims.html
NEW QUESTION 51
You have configured static NAT for a webserver in your DMZ. Both internal and external users can reach the webserver using the webserver's IP address. However, only internal users can reach the webserver using the webserver's DNS name. When external users attempt to reach the webserver using the webserver's DNS name, an error message is received.
Which action would solve this problem?
- A. Disable Web filtering
- B. Use destination NAT instead of static NAT
- C. Modify the security policy
- D. Use DNS doctoring
Answer: D
NEW QUESTION 52
Which two VPN features are supported with CoS-based IPsec VPNs? (Choose two.)
- A. IKEv1
- B. VPN monitoring
- C. IKEv2
- D. dead peer detection
Answer: C,D
NEW QUESTION 53
Your SRX Series device does not see the SYN packet.
What is the default action in this scenario?
- A. The device will drop the subsequent packets and the session will not be established
- B. The device will drop the subsequent packets and the session will be established
- C. The device will forward the subsequent packets and the session will be established
- D. The device will forward the subsequent packets and the session will not be established
Answer: A
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-tcp-session- checks.html
NEW QUESTION 54
A user is unable to reach a necessary resource. You discover the path through the SRX Series device includes several security features. The traffic is not being evaluated by any security policies.
In this scenario, which two components within the flow module would affect the traffic? (Choose two.)
- A. route lookup
- B. destination NAT
- C. source NAT
- D. services/ALG
Answer: A,B
NEW QUESTION 55
Click the Exhibit button.
The IKE policy and proposal are configured properly on both devices as shown in the exhibit. Which configuration snippet will complete the IKE configuration on the branch SRX Series device?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 56
Click the Exhibit button.
You have two hosts on the same subnet connecting to an SRX340 on interfaces ge-0/0/4 and ge-0/0/5. However, the two hosts cannot communicate with each other.
Referring to the exhibit, what are two actions that would solve this problem? (Choose two.)
- A. Set the SRX340 to Ethernet switching mode and reboot
- B. Put the ge-0/0/4 and ge-0/0/5 interfaces in different VLANs
- C. Remove the ge-0/0/4 and ge-0/0/5 interfaces from the L2 security zone
- D. Add an IRB interface to the VLAN
Answer: A,C
NEW QUESTION 57
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. NAT64
- B. persistent NAT
- C. DS-Lite
- D. NAT46
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 58
......
Apart from the official training, the following books can also be accessed as preparatory resources for JN0-635 test:
- 1st Edition of Juniper SRX Series: A Comprehensive Guide to Security Services on the SRX Series by B. Woodberg, and R. Cameron
A Kindle book like this can be bought via Amazon for $48.99 or you can try the eBook for free. This is a Juniper Networks authorized guide that covers not only SRX operation and deployment but also SRX Series devices. Topics covered here include SRX gateways usage, IP routing, attack mitigation, threat management, using SRX as a Layer 2 bridge, security against threats, configuration, troubleshooting, deploying SRX, implementing network address translation (NAT) types, and more.
- How I Passed JN0-635 Security Professional (JNCIP-SEC) Exam: Successfully Proven Tips by Canrosartain Publications
This guide is available to purchase on Amazon for almost $12. This book provides several tips that you can use to pass your JN0-635 exam successfully. What’s more, this book has a free coupon that will give you access to free practice test questions available at Vullam. So, if you want to ace this exam on the first try, you should definitely avail yourself of this manual.
- 1st Edition of Junos Security: A Guide to Junos for the SRX Services Gateways and Security Certification by R. Cameron, B. Woodberg, P. Giecco, T. Eberhard, and J. Quinn
This book is available from Amazon in the Kindle format for slightly more than $40. This is the introductory guide that is authorized for the new Juniper Networks SRX series for hardware. With it, you will gain practical insight into topics including executing, building up, and operating SRX that gives you a reliable reference to gear up for any Junos Security tests.
JN0-635 Cert Guide PDF 100% Cover Real Exam Questions: https://www.surepassexams.com/JN0-635-exam-bootcamp.html
Pass JN0-635 Review Guide, Reliable JN0-635 Test Engine: https://drive.google.com/open?id=1nEXEq1lbjjnsPWRmwFor1Ne7ekIYkejS