Reliable DES-3128 Dumps Questions Available as Web-Based Practice Test Engine
Correct and Up-to-date EMC DES-3128 BrainDumps
NEW QUESTION # 14
A customer recently added a Hyper-V 2016 servers' farm, and the hosted Virtual Machines need to be backed up. The administrator has already installed a NetWorker client on all Hyper-V hosts.
Which additional component must be installed on the Hyper-V hosts to accomplish this task?
- A. NMM
- B. vProxy
- C. Storage Node
- D. NMDA
Answer: B
NEW QUESTION # 15
A NetWorker server is backing up a Windows client lo LTO Ultrium-7 medi a. Users complained about a heavy load on this Windows server, and the backup was forcibly stopped. A customer asks to restore the data which was backed up before the backup stopped.
What should the administrator tell the customer?
- A. Open a service request with Dell Technologies Support
- B. Recovery from aborted save sets is not supported.
- C. Run a scanner command.
- D. Run a recover command.
Answer: B
Explanation:
NetWorker does not support recovery from aborted save sets, so the administrator should inform the customer that the data backed up before the backup was stopped cannot be recovered.
NEW QUESTION # 16
An administrator is creating an action resource in NetWorker. What must exist before this action can be completed?
- A. a protection group
- B. a notification
- C. a workflow
- D. a client
Answer: A
NEW QUESTION # 17
When deploying a new CloudBoost appliance, which command must be run to enable remote client mounts?
- A. remote-mount-password
- B. nsrsnmd
- C. passwd
- D. diagnostics
Answer: A
Explanation:
When deploying a new CloudBoost appliance, the remote-mount-password command must be run to enable remote client mounts.
NEW QUESTION # 18
A backup administrator needs to create a new NSR Client "ABC 123" and PSS file system backup save sets /data01 and /data02. They also need to create a skip files directive named "Skip GO" for * go extensions anywhere under data02 Use the simulator to achieve this When you have finished, continue to the next question.
Answer:
Explanation:
To create a new NSR Client "ABC 123" and PSS file system backup save sets /data01 and /data02, and a skip files directive named "Skip GO" for * .go extensions anywhere under /data02, the administrator can use the Networker CLI (Command Line Interface) to access the Networker server and create the NSR Client, PSS file system backup save sets, and skip files directive. Here are the steps:
Log in to the Networker CLI by entering the following command:
nsr_client -C ABC 123
Once logged in, create a new PSS file system backup save set for /data01 by running the following command:
savefs -p -s /data01
Create a new PSS file system backup save set for /data02 by running the following command:
savefs -p -s /data02
Create a skip files directive named "Skip GO" for * .go extensions anywhere under /data02 by running the following command:
savefs -p -s /data02 -k "* .go"
Verify that the new NSR client, PSS file system backup save sets and skip files directive have been created by running the following command:
nsr_client -l
Verify that the new PSS file system backup save sets are correctly associated with the new NSR client by running the following command:
nsr_client -G ABC 123
NEW QUESTION # 19
An administrator already added a client "CLientA" This client has recently been assigned a second DNS named "ClientAB" When the backup ran, the following error is observed
"The client ClientAB is not in backup servers' clients list."
Use the simulator to resolve this issue
When you have finished, continue to the next question
Answer:
Explanation:
The steps to resolve the issue of the client "ClientAB" not being in the backup server's clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client "ClientA" is present in the list of clients.
Verify that the client "ClientAB" is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to "ClientAB"
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.
NEW QUESTION # 20
An administrator is performing a directed recover to a Microsoft Windows cluster environment.
What is the role of the client that initiated the recovery?
- A. Destination client
- B. Source client
- C. NMC client
- D. Administering client
Answer: B
Explanation:
The client that initiated the directed recover is known as the source client. This client is responsible for sending the data to the destination client. The destination client is the one that will receive the data from the source client, and the administering client is the one that initiates the recover process. The NMC client is used for monitoring the recover process.
NEW QUESTION # 21
A customer needs to perform a Virtual Machine Recovery from a save set located on a Dell EMC Cloud Tier.
Which additional device type must be available to perform this recovery?
- A. CloudBoost
- B. PowerProtect DD
- C. PowerProtect Storage Direct
- D. AFTD
Answer: B
NEW QUESTION # 22
A backup administrator has configured Dell EMC Cloud Tier and the NetWorker data movement policy for long-term retention. The save sets are not moved to the Cloud even though cloning ran successfully What is the reason for this issue?
- A. User does not have the Cloud Tier privilege
- B. Data movement will occur only one time per month
- C. Missing replication license on PowerProtect DD
- D. Data movement policy on PowerProtect DD was not running yet
Answer: B
Explanation:
The data movement policy on Dell EMC Cloud Tier is configured to move the save sets to the Cloud only once a month. The cloning of the save sets may have run successfully, but the data movement will still only occur once a month.
NEW QUESTION # 23
Which NetWorker module must be installed on a NetWorker client running an SAP R/3 on Oracle to ensure it is backed up properly without a need to shut down the application?
- A. NMM
- B. NMSAP
- C. NMMEDI
- D. NMDA
Answer: B
Explanation:
NMSAP (NetWorker Module for SAP) is a NetWorker module that must be installed on a NetWorker client running an SAP R/3 on Oracle to ensure it is backed up properly without a need to shut down the application.
NEW QUESTION # 24
A NetWorker server is utilizing a remote storage node. There is a PowerProtect DD appliance with two VTLs configured, and it is attached to the storage node via Fiber Channel. There is also a physical media library attached to the same storage node.
How many nsrlcpd processes are running on the storage node?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
When a NetWorker server is utilizing a remote storage node, two nsrlcpd processes will be running on the storage node. The first one is responsible for communication between the NetWorker server and the storage node, while the second one is used to communicate with the PowerProtect DD appliance and the physical media library.
NEW QUESTION # 25
A DB2 database is running on an IBM AIX operating system. A customer asks an administrator to configure a backup with NetWorker.
How should the administrator respond?
- A. NMDA must be installed
- B. No additional module is required.
- C. AIX backup is not supported
- D. NMM must be installed
Answer: A
Explanation:
To configure a backup of a DB2 database running on an IBM AIX operating system with NetWorker, the administrator must first install the NetWorker Module for Databases and Applications (NMDA).
NEW QUESTION # 26
What is a part of a full backup in a Windows BMR recovery operation?
- A. Windows File System
- B. UEFI Partitions
- C. Critical volumes
- D. Windows Roles
Answer: A
NEW QUESTION # 27
A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?
- A. The Igtobbb package is not installed.
- B. LVM or VxVM are enabled on the OS level.
- C. AFTD device is enabled for Client Direct.
- D. PSS is enabled for target Data Domain devices.
Answer: A
Explanation:
Block-Based Backup requires that the Igtobbb package is installed on the RHEL server. If this package is not installed, then the Block-Based Backup will fail. The other options are not related to the cause of the issue.
NEW QUESTION # 28
Which monitoring tool is used to view current device operations, active sessions, messages concerning recent activity, and any pending messages?
- A. NetWorker Character-Based Interface
- B. Networker WebUser Interface
- C. nsrwatch
- D. nsradmin
Answer: C
Explanation:
Nsrwatch is a monitoring tool used to view current device operations, active sessions, messages concerning recent activity, and any pending messages. Nsrwatch can be used to monitor all services related to NetWorker. The other options are not related to this tool.
NEW QUESTION # 29
A NetWorker server is utilizing a remote storage node. A media library with two LTO Ultnum-8 drives is attached to the storage node via Fiber Channel interface. There is an AFTD device labeled to the Dally pool, and a media library has several cartridges labeled for the Weekly pool.
All devices are configured on the storage node. A Windows 2019 client is being backed up to the Daily pool while the Client Direct option is enabled in the client's properties.
What is the correct data flow?
- A. Backup data is being written directly to the LTO Ultrium-8 device.
- B. The storage node writes the data to the LTO Ultrium-8 device.
- C. Backup data is being written directly to the AFTD device.
- D. The storage node writes the data to the AFTD device.
Answer: B
Explanation:
In this scenario, the NetWorker server is utilizing a remote storage node with a media library containing two LTO Ultnum-8 drives. The AFTD device is labeled to the Dally pool and the media library has several cartridges labeled for the Weekly pool. When the Client Direct option is enabled in the client's properties, the storage node writes the backup data to the LTO Ultrium-8 device.
NEW QUESTION # 30
How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?
- A. Invoke the VMware Update Manager to download the installation package.
- B. Deploy an OVF template.
- C. Copy a zipped installation package to a Linux VM, and run the setup script
- D. Run an executable installation package
Answer: A
NEW QUESTION # 31
An administrator added several new LDAP user accounts for backup configuration and monitoring tasks . The LDAP users have been authenticated in NMC.
Where must the user accounts be added so these tasks can be performed on the server?
- A. Users field of the Security Administrators group on the NetWorker server
- B. Users user group on the NMC server
- C. External roles field of the user groups on the NetWorker server
- D. Privileges field of the user groups on the NetWorker server
Answer: C
NEW QUESTION # 32
A customer asked an administrator to configure Active Directory (AD) granular level backups A backup administrator discovered that the AD Domain distinguished name is CN=company,CN=local What should be entered in the Save Sets attribute for the Domain Controller client to back up the Active Directory?
- A. AD:CN=company.CN=local
- B. APPLICATIONS/AD/CN=company,CN=local
- C. CN=companyCN=local
Answer: B
NEW QUESTION # 33
A NetWorker workflow is configured as a probe-based backup
What actions must be included in the workflow?
- A. internal and metadata validation
- B. probe and backup actions
- C. check connectivity and probe actions
- D. clone and probe and action only
Answer: B
Explanation:
A probe-based backup workflow must include the probe and backup actions. The workflow will first probe the client to determine the data sets that need to be backed up and then perform the actual backup process.
NEW QUESTION # 34
What is the outcome of using the recover -iN command?
- A. The file overwrites the existing file if it is newer than the existing file.
- B. A recover is simulated, and no data is recovered.
- C. The file is not recovered if a conflict occurs.
- D. The recovered file is renamed when a conflict occurs.
Answer: B
Explanation:
The recover -iN command is used to simulate a recover operation. This command will show which files would be recovered if the recover command is run, but no data is actually recovered. The other options are not related to this command.
NEW QUESTION # 35
A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3 What is the recommended way to perform this?
- A. Deploy a NetWorker storage node in AWS.
- B. Manually copy data to AWS S3
- C. Deploy a NetWorker storage node in AWS.
- D. Utilize a Dell EMC Cloud Tier feature.
Answer: B
NEW QUESTION # 36
......
EMC DES-3128 certification exam is a vendor-neutral exam that covers a wide range of topics related to backup and recovery, including NetWorker installation, configuration, and troubleshooting. DES-3128 exam also covers advanced topics such as disaster recovery, replication, and data deduplication. Passing DES-3128 exam demonstrates that the candidate has a comprehensive understanding of the NetWorker solution and can effectively implement it in an enterprise environment.
100% Reliable Microsoft DES-3128 Exam Dumps Test Pdf Exam Material: https://www.surepassexams.com/DES-3128-exam-bootcamp.html
Current DES-3128 dumps Preparation through Our Practice Test: https://drive.google.com/open?id=1n4QXugiKdXJjTjMNNnUPGLNNg21DVEyW